Click to learn more about Diehl Tool Steel's Diehl Express rapid tool steel turnaround
 
Accu-Square Logo

Diehl Tool Steel has been selling quality tool steel for over 85 years

Diehl Tool Steel is an ISO 9001:2008 certified company

1-800-543-1566

Request a tool steel quote from Diehl Tool Steel
Email Diehl Tool Steel Customer Service

1-800-543-1566

Request a quote from Diehl Tool SteelEmail Diehl Tool Steel Customer Service

Print this pageEmail this to someoneShare on LinkedInShare on Google+Share on Facebook

A-36 XL PLATE

A-36 XL Plate Low Carbon Steel

A-36 XL Plate is a fine quality pre-finished steel that is ground and stress relieved, flat and accurate to size with square corners and available for immediate use.

A-36 is a low carbon hot-rolled steel that is one of the most commonly used steel alloys. It is an excellent choice for tooling plate applications. The A-36 analysis combines a 0.22 to 0.28% carbon content with silicon and manganese to produce a fine quality stress relieved material. A-36 hot roll plate has a 58,000/80,000 (psi) tensile strength and a 36,000 (min psi) yield strength. Compared to 1018 Cold Roll, A-36 has a rougher surface due to the hot rolling process. Though it is more difficult to machine and weld compared to 1018 Cold Roll, A-36 is usually less expensive.

FINISH — 50/75 RMS
TOLERANCES — Thickness +/- .003, saw-cut on width and length

Analysis:


C

CO

CR

MN

MO

NI

P

S

SI

V

W
0.250.80 – 1.200.04 Max.0.05 Max.0.40 Max.

Size Availability:

Metric • Non-Standard • Standard

Applications:

Die StrippersFixturesJigs
Machine PartsPunch HoldersTemplates
Tooling Plate

Designations:

AISI A36 Carbon Steel-US

Data is typical and should not be construed as actual values for any category.
Applications and technical information require engineers and tool designers to exercise independent judgement.
Print this pageEmail this to someoneShare on LinkedInShare on Google+Share on Facebook
Request Mailed Literature
Enter your name and address and we will mail you our latest brochures and information sheets.
  • This field is for validation purposes and should be left unchanged.