M2, D2, A10, CPM + Material Compositions

Need to update product links

Grade	C	CO	CR	MN	MO	NI	P	S	SI	V	W
1018 Cold Roll	0.15 – 0.20			0.60 – 0.90			0.04 Max.	0.05 Max.
410	0.15 Max.		11.50 – 13.50	1.00 Max.					0.40
4140 Annealed	0.38 – 0.43		0.80 – 1.10	0.75 – 1.00	0.15 – 0.25		0.04 Max.	0.04 Max.	0.14 – 0.35
4140 Heat Treated	0.38 – 0.43		0.80 – 1.10	0.75 – 1.00	0.15 – 0.25
4140 Super Brake Die	0.37 – 0.44		0.75 – 1.20	0.75 – 1.00	0.15 – 0.25		0.04 Max.	0.04 Max.	0.14 – 0.35
4150 Heat Treated	0.48 – 0.53		0.80 – 1.10	0.75 – 1.00	0.15 – 0.25		0.04 Max.	0.04 Max.	0.15 – 0.30
420	0.15 Min.		12.00 – 14.50	1.00 Max.					1.00 Max.	0.30
4340	0.38 – 0.43		0.70 – 0.90	0.65 – 0.85	0.20 – 0.30	1.65 – 2.00	0.04 Max.	0.04 Max.	0.15 – 0.30
440C	0.95 – 1.20		16.00 – 18.00	1.00 Max.	0.75 Max.		0.04 Max.	0.03 Max.	1.00 Max.
6150	0.48 – 0.53		0.80 – 1.10	0.70 – 0.90			0.04 Max.	0.04 Max.	0.15 – 0.30	0.15 Min.
8620	0.18 – 0.23		0.40 – 0.60	0.70 – 0.90	0.15 – 0.25	0.40 – 0.70	0.04 Max.	0.04 Max.	0.15 – 0.30
A-10	1.25 – 1.50			1.60 – 2.10	1.25 – 1.75	1.55 – 2.05			1.00 – 1.50
A-2	0.95 – 1.05		4.75 – 5.50	0.40 – 1.00	0.90 – 1.40				0.10 – 0.50	0.15 – 0.50
A-36 Hot Roll Plate	0.25			0.80 – 1.20			0.04 Max.	0.05 Max.	0.40 Max.
A-36 XL Plate	0.25			0.80 – 1.20			0.04 Max.	0.05 Max.	0.40 Max.
A-6	0.65 – 0.75		0.90 – 1.40	1.80 – 2.50	0.90 – 1.40				0.10 – 0.70
A-8	0.50 – 0.60		4.75 – 5.50	0.20 – 0.50	1.15 – 1.65		0.03 Max.	0.03 Max.	0.75 – 1.10		1.00 – 1.50
CPM 10V^®	2.45		5.25		1.30					9.75
CPM 15V^®	3.40		5.25	0.50	1.30			0.07	0.90	14.50
CPM 1V^®	0.55		4.50		2.75					1.00	2.15
CPM 3V^®	0.80		7.50		1.30					2.75
CPM 9V^®	1.80		5.25	0.50	1.30				0.90	9.00
CPM REX 76^®	1.50	8.50	3.75	0.30 Min.	5.25			0.06 Min.	0.30	3.10	9.75
CPM REX M-4^®	1.30		4.00	0.30	4.50			0.03 Max.	0.30	4.00	5.50
CPM REX T-15^®	1.60	5.00	4.00	0.30				0.06 Min.	0.30	4.90	12.00
CPM S90V^®	2.30		14.00		1.00					9.00
D-2	1.40 – 1.60		11.00 – 13.00	0.10 – 0.60	0.70 – 1.20				0.10 – 0.60	0.50 – 1.10
D-7	2.15 – 2.50		11.50 – 13.50	0.10 – 0.60	0.70 – 1.20				0.10 – 0.60	3.80 – 4.40
H-11	0.33 – 0.43		4.75 – 5.50	0.20 – 0.60	1.10 – 1.60				0.80 – 1.25	0.30 – 0.60
H-13	0.32 – 0.45		4.75 – 5.50	0.20 – 0.60	1.10 – 1.75				0.80 – 1.25	0.80 – 1.20
L-6	0.65 – 0.75		0.60 – 1.20	0.25 – 0.80	0.50	1.25 – 2.00	0.03 Max.	0.03 Max.	0.50	0.20 – 0.30
Low Carbon	0.15 – 0.25			0.60 – 1.20			0.04 Max.	0.05 Max.
M-2	0.78 – 1.05		3.75 – 4.50	0.15 – 0.40	4.50 – 5.50	0.30 Max.	0.03 Max.	0.03 Max.	0.20 – 0.45	1.75 – 2.20	5.50 – 6.75
M-4	1.25 – 0.14		3.75 – 4.75	0.15 – 0.40	4.25 – 5.50				0.20 – 0.45	3.75 – 4.50	5.25 – 6.50
M-42	1.05 – 1.15	7.75 – 8.75	3.50 – 4.25	0.15 – 0.40	9.00 – 10.00				0.15 – 0.65	0.95 – 1.35	1.15 – 1.85
O-1	0.85 – 1.00		0.40 – 0.70	1.00 – 1.40					0.10 – 0.50	0.30 Max.	0.40 – 0.60
O-6	1.25 – 1.55		0.30 Max.	0.30 – 1.10	0.20 – 0.30				0.55 – 1.50
P-20	0.28 – 0.40		1.40 – 2.00	0.60 – 1.00	0.30 – 0.55		0.03 Max.	0.03 Max.	0.20 – 0.80
P-20 HI HARD	0.28 – 0.40		1.40 – 2.00	0.60 – 1.00	0.30 – 0.55		0.03 Max.	0.03 Max.	0.20 – 0.80
P-20-32	0.28 – 0.40		1.40 – 2.00	0.60 – 1.00	0.30 – 0.55		0.03 Max.	0.03 Max.	0.20 – 0.80
S-1	0.40 – 0.55		1.00 – 1.80	0.10 – 0.40	0.50 Max.		0.03 Max.	0.03 Max.	0.15 – 1.20	0.15 – 0.30	1.50 – 3.00
S-5	0.50 – 0.65		0.10 – 0.50	0.60 – 1.00	0.20 – 1.35				1.75 – 2.25	0.15 – 0.35
S-7	0.45 – 0.55		3.00 – 3.50	0.20 – 0.90	1.30 – 1.80				0.20 – 1.00	0.35 Max.
T-1	0.65 – 0.80		3.75 – 4.50	0.10 – 0.40					0.20 – 0.40	0.90 – 1.30	17.25 – 18.75
T-15	1.50 – 1.60	4.75 – 5.25	3.75 – 5.00	0.15 – 0.40	1.00 Max.				0.15 – 0.40	4.50 – 5.25	11.75 – 13.00
VERTEX	1.00		8.25	0.50	2.25				1.00	0.40
W-1	0.70 – 1.50		0.15 Max.	0.10 – 0.40	0.10 Max.				0.10 – 0.40	0.10 Max.	0.15 Max.